Us-balance US-EXTREME 1000g x 0.1g Touch Screen Bedienungsanleitung PDF herunterladen

Instructions US-EXTREME

Thank you for purchasing our pocket scale. We are confident that with normal use and

proper treatment your scale will provide you with years of reliable service. Please read all

the operation instructions carefully before you use your new scale.

Display Messages:

• LO – Low battery; please change the batteries in the scale.

• OuEr- The load cell of the scale is being overloaded. You need to remove the

excessive weight from the scale immediately.

• UnSt – The scale is placed on an unstable surface, please move the scale to a

more stable surface.

• rCAL – the scale can not return to zero, please recalibrate the scale.

• CAL – This is the prompt for beginning the calibration process of your scale. You

will see this message when you press and hold the Cal button on your scale. Once

this message appears, you must release the button and follow the remaining steps

for calibrating your scale.

• PASS – you have successfully calibrated your scale, you are now able to use the

scale.

• FAIL – Calibration has failed, please make sure you have the scale on a stable

surface and that you are using the correct weight to calibrate the scale. Try to

calibrate the scale following the calibration instructions exactly.

US-Balance Instructions:

ON/OFF FUNCTION

Place your scale on a flat and stable surface away from any electronic equipment that

may interfere with the scale. Press and release the ON/OFF button, wait until the display

shows “0.0” and the zero-stable sign “ ”, you may now place the object you want to

weigh on the platform. The scale can be read when the lock sign “ ” is shown in the

display.

TARE FUNCTION

Turn on the scale as described above, place the “tare item” on the platform, press the

“ZERO” button to zero out the display, when “0.0” appears on the screen you may now

place items on the scale to be weighed. Once you are finished weighing, remove all

objects from the scale, press the “ZERO” again to cancel the TARE FUNCTION.

1 2

Seite 1

Instructions US-EXTREME Thank you for purchasing our pocket scale. We are confident that with normal use and proper treatment your scale will

Seite 2

RETURN TO ZERO After weighing an item, if the display does not read “0.0” press the ZERO button to return to “0.0” and you are ready to weigh again.

Keine Kommentare

Us-balance US-EXTREME 1000g x 0.1g Touch Screen Bedienungsanleitung